Error codes of com.WebServicesEngine

Error codes returned by com.WebServiceEngine methods.

Table 1. com.WebServiceEngine error codes
Number	Description
-1	`Timeout` com.WebServiceEngine.ProcessServices(x) timeout is reached. No requests to process during x seconds.
-2	`AsCloseCommand` GAS tells the DVM to shutdown. You must exit your application.
-3	`ConnectionBroken` Client has closed the connection in standalone GWS (without GAS).
-4	`ConnectionInterrupted` Ctrl-C received. Interruption received by DVM. You must exit your application.
-5	`BadHTTPHeader` Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-6	`MalformedSOAPEnvelope` Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-7	`MalformedXMLDocument` Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-8	`InternalHTTPError` Communication issue with application server or client.
-9	`Unsupported operation` The URL of the operation requested is unknown. Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-10	`UnknownError` This is an internal error, contact the support team. You must exit your application.
-11	`WSDL generation failed` You need to debug your application.
-12	`WSDL Service not found` Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-13	`Reserved` No need to exit the application. A new request might not have the issue.
-14	`Incoming request overflow` You exceeded the data maximum length allowed by com.WebServiceEngine.SetOption(maximumresponselength).
-15	`Server was not started` Call to com.WebServiceEngine.Start() failed. You must exit your application.
-16	`Request still in progress` With RESTful service, you are currently processing a request and has not yet send the response and try to process another request. You need to debug your application. It depends, you might not need to stop your application.
-17	`Stax response error` You need to debug your application. Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-18	`Input request handler error` You need to debug your application. Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-19	`Output request handler error` You need to debug your application. Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-20	`WSDL handler error` You need to debug your application. Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-21	`SOAP Version mismatch` Your client SOAP version does not match your server SOAP version, amend either your client or your server code.
-22	`SOAP header not understood` Modify your server code to handled the mustUnderstand attribute. Use the incoming request handler.
-23	`Deserialization error` Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.
-24	`Reserved error code -24` This error code is reserved for future use.
-25	`Web Services Addressing action is mandatory` Check that the WSA action is specified in the SOAP message.
-26	`Web Services Addressing message header is invalid` Check that the WSA header is correct in the SOAP message.
-27	`Web Services Addressing message header is mandatory` Check that the WSA header is specified in the SOAP message.
-28	`Web Services Addressing message protocol does not match` Check that the WSA message uses the protocol version of the client matches the version expected by the server.
-29	`Cookie error` Check that the HTTP request contains a valid cookie.
-30	`No active web operation` The method was called outside the context of a web operation processing.
-31	`Web Operation was flushed` This code is returned by the `ProcessServices()` or the `HandlerRequest()` method, to indicated that the `Flush()` method was called during the last web operation execution.
-32	`Serialization error` Check the message with FGLWSDEBUG or display SQLCA.SQLERRM.